Basic Info.
Certification
CE, CE, ISO, RoHS, CCC
Installation Mode
Wall Mounted
Application
Home, Industry
Working Power Supply
AC220V/50Hz
Sampling Method
Natural Diffusion
Sensor
Semiconductor Sensor
Alarm Setting Value
8lel%
Response Time
Less Than 30 Seconds
Recovery Time
Less Than 30 Seconds
Alarm Mode
Sound and Light Alarm
Nominal Pressure Pn
0.4MPa
Application Valve Type
Pulse Valve
Working Environment
Indoor Installation
Specification
110.9*70.7*43.85
Product Description
YUMO Kitchen gas intelligent protection system YM-KGPS with 433 remote control
Detailed Photos
Product Description
This product is a new type of combustible gas detection and wireless linkage control valve opening device, used for emergency cut off gas pipeline gas source and municipal power supply power linkage protection. It consists of combustible gas detector, wireless remote control solenoid valve and intelligent remote control circuit breaker. Under normal monitoring conditions, when the detector detects that the concentration of combustible gas in the air reaches the alarm setting value, the detector sends an audible and optical alarm signal, and sends a wireless coded control signal to command the wireless solenoid valve to close the valve and the intelligent remote control circuit breaker to open, automatically cut off the air source and power supply, and effectively avoid the occurrence of fire, explosion, poisoning and other malignant events in the use of gas places. Protect life and property safety. It is a necessary safety precaution product for household and catering industry to use gas.
Specification |
detector |
Size | 110.9*70.7*43.85mm |
working power supply | AC220V/50Hz |
Applicable gas | methane |
Sampling method | natural diffusion |
sensor | semiconductor sensor |
Alarm setting value | 8LEL% |
environmental conditions | indoor temperature -10ºC ~ 55ºC relative humidity 95%RH |
Response time | less than 30 seconds |
Recovery time | less than 30 seconds |
Alarm mode | sound and light alarm |
Wireless solenoid valve |
Power supply voltage | No.7 battery (2 batteries, a total of 3V) |
nominal pressure PN | 0.4Mpa |
valve and pipe connection | G1/2"(internal thread), G3/4" |
trigger to close the valve time | 4 ~ 6 seconds |
application valve type | pulse valve |
wireless receiving distance | 30 ~ 100 meters (open without interference) |
standby current | ≤ 10uA |
wake up current | ≤2mA |
alarm working current | <20mA |
Working environment | indoor installation |
Intelligent remote circuit breaker |
rated voltage | AC220V |
rated current | 63A |
rated power | 13KW |
rated frequency | 50Hz |
Installation category | guideway installation |
the use of environment | -25ºC ~ 70ºC |
electrical standard | electrical life on and off 100,000 times |
installation requirements(1) Installation position of detector
Detectors and combustible gas appliances should be located in the same room.
If the detector is mounted on a wall, it should be higher than the height of any Windows or doors, but at least 15cm from the ceiling;
If the detector is mounted on the ceiling, it should be at least 30cm away from any wall and at least 1M away from potential air sources.
If there is a barrier in the room, the detector should be located on the same side of the barrier as the potential air source; In a room with a pitched ceiling, the detector should be on the high side of the room; The detector should be located very close to the area where people often breathe.
The following locations are not suitable for installation of detectors:
1, do not install in the bathroom and other water vapor larger place;
2. Do not install it in the place directly opposite the stove oil smoke;
3, do not install in the place of frequent power failure;
4, do not install in the place covered by curtains;
5, do not install near volatile organic solvents;
6, do not install in the chimney, air vent, ventilation pipe in the gas passage and well-ventilated place;
7, do not install in the temperature may fall below 0ºC or rise to 55ºC above the place;
8, do not install in a place that is easy to be bumped, damaged or inadvertently moved.
(2) Wireless solenoid valve installation guide
1. The solenoid valve installation unit shall have the corresponding qualifications and carry out normative construction and installation according to the relevant gas management regulations;
2, the solenoid valve should be installed in the indoor total intake valve after, for maintenance;
3, should be installed according to the airflow direction indicated by the valve body, the valve body coil shall not stand upside down, allow horizontal or vertical installation;
4, the solenoid valve should confirm the connection is reliable, and close contact with the wireless controller interface, to prevent bad contact. Transparent dust cover shall not be missing. After manually opening and closing the valve, it must be covered again.
5, with the supporting detector to have an appropriate distance, to prevent when the alarm, can not receive wireless signal;
6, the pipeline in the implementation of the test test sealing performance, should make the solenoid valve in the open state.
(3) Installation position of intelligent remote control circuit breaker
1, installed in 35*7.5mm standard guide rail;
2, the clamp wire terminal, wire cross-sectional area up to 16mm².
Measures for handling gas leakage alarmWhen the detector detects that the concentration of combustible gas in the surrounding environment reaches the alarm setting value, the detector will send an audible and visual alarm signal. When the concentration of combustible gas drops below the alarm setting value, the detector will automatically return to the normal monitoring state.
When the detector alarms, the following actions should be performed:
1. Close the fuel and gas supply system;
2. Open doors and Windows for ventilation;
3, do not move any electrical switch and use open flame;
4. Immediately evacuate to a place with fresh air, count the number of people, and do not enter the room again until the emergency personnel arrive and the leaked gas is fully ventilated and dissipated;
5, check the cause of leakage, and timely ask professional maintenance.
ideas1, do not use a large number of pungent odor substances near the detector, such as hair spray, insecticide, paint, adhesives, so as to avoid false alarms;
2, do not often use high concentration detection gas impact sensor, in order to extend the service life of the sensor;
3, do not wipe the detector with detergent or solvent, chemicals may cause permanent damage or contamination of the sensor;
4, the product contains precision components, do not arbitrarily disassemble and assemble the system device;
5, this product can effectively reduce the occurrence of accidents, but can not ensure foolproof. For your safety, in addition to the correct use of this system device, in daily work and life, but also should be vigilant, strengthen safety awareness, do civil air defense and technical defense combination.
Company Profile
Packaging & Shipping
FAQ
Q:How to order our product?
A: 1) Please tell us the model and quantity and other request you need.
2) We make the PI for you.
3) After you confirm the PI, we arrange the order for you after receiving your payment.
4) After the goods finished, we send the goods out to you and tell you the tracking number.
5) We will track your goods until you receive the goods.
Q: What's your warranty?
A: One year.
Q: What's your contact information?
A: Our address: Liushi town, Zhejiang province, China.
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method.
Q: What about MOQ?
A: First order MOQ=1pcs.
Q: If I want to release order, what's the payment method you accept?
A: We accept T/T, Paypal, Western union, L/C.
Q: If I want to release order, what's the process?
A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply within 24hrs.
Thank you & Now pls send your kindly inquiry ! ^!^
Address:
Wenzhou Leqing, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Tools & Hardware
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
China Yumo Electric Co., Ltd., founded in 2007, is a professional manufacturer in the field of industrial automation control. Since the establishment of the company, we have focused on the field of sensors and collector rings. YUMO, located in the Yangtze River Delta, is a technology, development, manufacturing, market and automation solution enterprise, providing customers with various competitive collector rings and encoders.
The company adheres to the principle of "honesty, quality first, user first, and development strategy", and focuses on customer needs with strong technology research and development as the starting point and professional international management team as the driving force. Improve core competitiveness and build automation technology brand.
YUMO collector ring and encoder have passed CE and RoHS certification. With perfect modern management system and information management system, our rotary encoder production line has also obtained ISO9001 international quality certification. Based on good quality and professional services, our products are widely used in industrial automation control fields, such as AGV, servo motors, CNC machine tools, automobiles, glass, ceramics, elevators, paper making, food machinery, textile machinery, packaging machinery, wind power generation, etc.
Our various collector rings and encoders have been exported to more than 80 countries, such as the United States, Canada, South America and European countries, including Germany, Britain, Italy, Poland, Romania, etc.